APC UPS
Showing all 9 results
-
-
-
APC UPS, UPS
APC 2 kva Smart-UPS 2000VA LCD 1300W
- Output power capacity: 1.3 KWatts / 2.0 kVA
- Max Confidurable Power: 1.3 KWatts / 2.0 kVA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 5% at full load.
- Output Frequency (sync to mains): 50 Hz
- Topology: Line Interactive
- Waveform Type: Sine Wave
SKU: n/a -
APC UPS, UPS
APC Back-Up 700VA UPS – (BX700UI)
- LCD (Liquid Crystal Display) gives the status of over 20 different utility and battery backup conditions.
- Automatic Voltage Regulation (AVR) instantly corrects voltage fluctuations so you can work indefinitely through brownouts and over voltages.
- 3 “Battery Backup & Surge Protected” Outlets keep a CPU, monitor and other critical devices running when the power goes out or fluctuates outside safe levels.
- 3 “Surge Only” Outlets protect printers, faxes or other equipment without reducing battery capacity. (Includes two power-saving “Controlled” outlets).
- Data Line Surge Protection guards against surges and spikes traveling over Ethernet or coax cable lines.
- PowerChute Software lets you use your computer to access additional power protection and management features:
- Preserves your work, shuts down system during outages
- Restarts your system, minimizing work disruptions
- Enables customization of your Back-UPS settings
- Monitors and displays power and battery status
- Push Button Circuit Breaker enables quick recovery from overloads.
- Automatic Diagnostic Testing ensures your unit is ready when you need it.
SKU: n/a -
APC UPS, UPS
APC Back-UPS 1400VA UPS – (BX1400UI)
- Back-UPS BX provides guaranteed power and surge protection for desktop computers, wireless networks, gaming consoles and other electronics.
- 1400 VA / 700 Watts – Automatic Voltage Regulation (AVR)
- PowerShute Shutdown Software – USB Connector
- 6 Surge protected IEC-C13 Outlets
- Content of delivery: APC Back-UPS BX 1400VA Shutdown-Software User Manual
SKU: n/a -
APC UPS, UPS
APC BV1000I-MS 1000VA /600 Watts Easy Use ups
• Output power capacity: 600 Watts / 1.0kVA
• Max Configurable Power (Watts): 600 Watts / 1.0kVA
• Nominal Output Voltage: 230V
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sine wave
• Transfer Time: 6ms typical : 10ms maximum Input
• Input frequency: 50/60 Hz +/- 1 Hz UnsynchronisedSKU: n/a -
APC UPS, UPS
APC BV650I-MS 650VA /375Watts Easy ups
• Output power capacity: 375Watts / 650VA
• Max Configurable Power (Watts): 375Watts / 650VA
• Nominal Output Voltage: 230V
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sine wave
• Transfer Time: 6ms typical : 10ms maximum Input
• Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
• Cord Length: 1.52meters
• Number of Power Cords: 1 Batteries & RuntimeSKU: n/a -
APC UPS, UPS
APC BV8000I-MSX 800VA /450 Watts Easy Use ups
• Output power capacity: 450 Watts / 800VA
• Max Configurable Power (Watts): 450 Watts / 800kVA
• Nominal Output Voltage: 230V
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sine wave
• Transfer Time: 6ms typical : 10ms maximum Input
• Input frequency: 50/60 Hz +/- 1 Hz UnsynchronisedSKU: n/a